The chrome-plated U-box holder made by NPdrums® allows Chinese boxes or toothpicks to be attached to the drum stably and without vibrations. It is supplied in a pack of 2 units with all the necessary parts for mounting on the drum body during parades and processions.
The U-bracket is designed to attach the Chinese snare drum inside the drum, placing it in a position accessible to the drummer during the parade. The two chrome plates of 67x15x03 mm are fixed to the outside of the drum, while the metric 6 screws are embedded in the Chinese case to secure the assembly. This system is compatible with all types of Chinese toothpicks and boxes from the NPdrums® catalog.
Each pack of 2 supports includes the plates, screws in two sizes (M6x50) and the plastic washers necessary for assembly. Longer screws allow clamping in thicker Chinese boxes, while shorter screws are suitable for thinner parts. It is recommended to start the assembly with two screws and check the coupling before installing the complete four.
The 2 plastic washers included in the pack are interposed between the plate and the drum surface, acting as a mechanical insulator to prevent parasitic vibrations during the roll. This detail is especially relevant in parades and processions, where the continuous movement of the drummer can generate slack in the metal couplings without this type of protection. The chrome finish of the plates provides corrosion resistance in outdoor conditions.
This U-bracket is recommended for Chinese snare drums that are played at a higher height, as the design of the plates allows the position of the Chinese snare drum to be raised with respect to the drum body. The combination of screws in two different lengths offers flexibility to adapt the mount to the specific thickness of each Chinese box or toothpick used by the musical formation.
The chrome-plated NPdrums® U-box stand in pack of 2 provides a stable, anti-vibration coupling system to integrate the Chinese box into the drum during parades and processions of the bugle and drum bands.
Sheet
Specific references
Most viewed products
Technical characteristics Model: Arahal Crome Drum 35.6 Ø x 14 cm Helmet: Inlaid aluminium 1.2 mm Finish: Purple anodized Whisk hoop: Aluminium 35.6 Ø x 20 mm plain black (31-6970-00) Resonant Ring: Standard aluminium 35.6 Ø x 20 mm plain black (31-6975-00) Rods: 10 units left/right thread crome finish (30-3100-00) Staff system: Internal Regulating Butterfly (30-4610-00) 60 Natural Silk...
- Aro Tabalet Valenciá 12" X 3.0 cm beater.- Solid wood with recess cover.- Walnut finish.- 10 tension holes.- Weight approx. - Holes for thread bordonero.
- Wooden ring beater groove.- Lacquered on fire.- Measure 45,7 Ø cm X 3.0 cm.- Solid wood ring in beech.- Weight approx.- With two holes to put a hanging hook mod-30-7260-00 mod-30-7380-00 mod-30-7390-00 mod-30-7460-00
-Includes:- Great Aluminium Box 35.6 Ø X16 cm.- Anodized helmet in blue color.- Chrome metal ring 1.6 mm beater.- Chrome metal ring 1.6 mm snare rail. - 1.2 mm recessed aluminum helmet.- 10 picolo acorns with independent tension.- Quick box lever to adjust the snare drum.- Fixed snare bridge.- Chrome 20 thread cord drawstring.- Chrome-finished tuning key.- drumhead white whisk 250 microns.-...
- Sayon Pasión del Sur chrome drum 35x16cm lined in green.- Smooth graphite finish hoops.- 5mm beech plywood hull, 7 ply PVC lined.- 8 chrome-plated acorns with independent tension.- Rib lever with adjustment and fixed snare bridge.- Hanging hook with ring.- Position of putting support Chinese box. - Chrome-plated tensioning lamp. -16 wound silk threads. - drumhead 385 micron frost whisk and 75...
- Drum Sayon Pasion del Sur crome 35x16cm lined in black.- Smooth graphite finish rings.- 5mm beech plywood hull, 7 ply lined with PVC.- 8 chrome acorns with independent tension.- Bordonero lever with regulation and fixed bridge bordonero.- Hanging hook with ring.- Position to put Chinese Snare drum support. - Chrome-plated tensioning stick. -16 twisted silk bordoneros threads. - Whisk patch...
- Peruvian Timbale Wood Hoop 38.1 Ø X 2.5 cm.- Holes for hanging hook.- 10 Tuning holes.- Walnut stain finish.- Weight approx. 0.150 gr.- Ring for top installation.
16 other products in the same category:
- Support Chinese Snare drum high S.- 2 plates of 115x15x03 chrome.- 4 screws m6X50.- 4 rubber washers.- Weight approx.- Ideal for carrying the Chinese Snare drum outside the drum.
- High Chinese box holder S.- 2 plates of 115x15x03 OLD.- 2 m6X50 screws.- 2 x M6x30 screws.- 4 plastic washers.- Weight approx.- Ideal for carrying the Chinese box outside the drum.
- 91.4 Ø Bass Drum Concert Stand.- Rotating ears for 360º position.- Three-point height adjustment.- 4 wheels and 2 with brakes.- Painted with epoxy stone.- Weight approx.
- Table accessories with support.- Adjustable height.- Double-arm tripod feet.- Table size: 500 x 350mm.- Carpeted non-slip surface.- Chrome support.- Weight approx.- Ideal for small percussion.
- Soprte Tam Tam 90 cm.- Inverted U tube.- Saucer range of 85,90,95- 2 wheels with brake.- 2 wheels without brake.- 2 cast aluminum brackets. - Aporx weight.- Easy support and maneable comfortable transport.
- DRUMSETS saddle.- Double stirrup construction.- 28 cm diameter circular seat with extremely low height adjustment.- Threaded shaft adjustment.- Minimum seat height: Approx. 37 cm- Maximum seat height: Approx. 47 cm- Weight approx. 2.600 KG.
- Shoulder pad for alumninio bass drum.- Protector in manbras and belly.- Straps to hold bomo.
- Flat Chinese box holder.- 2 plates of 100x15x03 old.- 2 m6X50 screws.- 2 x M6x30 screws.- 4 plastic washers.- Weight approx.- Ideal for carrying the Chinese box outside the drum.
-Includes: - Bell support.- Clamp for fastening to the hoop.- Chrome bar.- Cowbell not included.- Weight approx. 0.300,Kgr.
-Includes:- Bass drum chamber support 76.2 Ø. - Three-point height adjustment. - Ears with turning handle.- 2 Wheels with brake.- 2 wheels without brakes.- 2 cast aluminum brackets. - Weight approx. 8,150 Kgr.
-Includes:- Bass drum camera stand 60.9 Ø. - Three-point height adjustment.- Ears with turning handle.- 2 Wheels with brake.- 2 wheels without brakes. - 2 cast aluminum brackets. - Weight approx. 8,075 Kgr.
- Floor stand for Tom toms.- Height adjustable.- Clamping a tom.
-Includes: - Blank box support.- Ideal for all types of deaf boxes.- 3/8 thread pitch.- Folding to tranorate.- Finished with black epoxy.- Position regulator.- Weight approx.1,Kgr.
- Floor support for Tom toms.- Height adjustable.- Hold of 2 toms.
Deaf NPdrums-8 box with toothpick and floor stand for practice The NPdrums-8 deaf box with full toothpick and floor support is the most complete version of the NP-8 deaf box. It combines the rebound rubber surface with the toothpick and ground support, offering the drummer a self-contained practice set to rehearse in quiet places without disturbing during prolonged sessions of technique and...
-Includes:- Bass drum chamber holder 91.4 Ø. - Three-point height regukation.- Ears with turning handle.- 2 Wheels with brake.- 2 wheels without brakes.- 2 cast aluminum brackets. - Weight approx. 8,250 Kgr.
Customers who bought this product also bought:
- Damper 14" 35.6 cm internal.- Foam ring.- Easy to place.- Weight approx.
-Includes:- Mini crome Sayón 30.5 Ø X 12 cm.- Hull of plywood calabó 5mm 2 ply.- Lined in black PVC.- Plastic beater ring 25.4 Ø x 35mm graphite. (31-7811-01)- Plastic snare ring 25.4 Ø x35mm graphite. (31-7821-01)- Complete drum bass bridge. (30-6830-00)- Decompression part. (99-3650-00) - 4 wound silk staffs. (28-0000-00)- 10 tension screws 80mm. (30-4020-00)- 10 Nickel-plated washers...
-Includes.- Special Chinese Snare drum green fiber.- Measures 17,5 cm x 0.8 cm- Holes for support.- Use for parading.- Weight approx.
- drumhead fibertone 35.6 cm.- Thick: 250 mi.- Faux leather finish.- Weight approx.
- Belting for cross timba of 40 mm black nylon.- 50 mm wide nylon with ring end.- Length of the strap 1.20 mt at the waist. - Height adjustment by black buckle.- Weight 0.55 kg.- Widely used for bands, brass bands, batucadas.- Comfortable and adapts to the shoulder, boxes, timbas
- Damper 12" 30.5 cm internal.- Foam ring.- Easy to place.- Weight approx.
- Special Chinese Snare drum bubinga.- Measures 17,5 cm x 0.8 cm- Holes for support.- Use for parading.- Weight approx.