The pedal for Bombo NPdrums is built on a base to the ground where the action of the foot sets in motion a mace with recoil to hit the patch of the bass drum, with height adjustment and sticking of the club.
Sheet
Specific references
- M6x80mm chrome finish screw.- Pack of 10 screws.- Weight approx.
- Decompression piece with thread.- Rod diameter 10 mm.- Nut and washer. - Chrome finish.- Weight approx.
- Clamp with letter.- 12.7 mm rod 360º rotation - Chromium finish.- Squeeze moth on hinge.- Weight approx.
- Professional giraffe support.- 29mm, 26mm, 22mm tube.- Telescopic in three tubes.- Extendable with a 600 mm arm.- Adjustable knobs 8 mm. - Double 17x4mm tripod plates.- Non-slip rubbers on the legs. - Ideal for giraffe-like plate foot.- Chrome finish.- Weight 4,389 kg. - Support great durability as long as it is taken care of.- Ideal for musicians who need to do a lot of assembly and...
- Support for professional hit hats.- 29 mm, 26 mm tube.- Telescopic in two tubes.- Pedal hardness adjustment.- Adjustable knobs 8 mm. - Double 17x4mm tripod plates.- Non-slip rubbers on the legs. - Ideal for seated playing.- Chrome finish.- Weight 4,204 kg. - Support great durability as long as it is taken care of.- Ideal for musicians who need to do a lot of assembly and disassembly.
-DRUMSETS Snare drum foot. -Double-arm feet-Adjustable basket for boxes from 10" to 14".-With gear clamp for fast and flexible adjustment. -Multi-clamp.-Minimum and maximum height: 47cm - 63c.-Non-slip rubbers. - Weight approx. - Ideal for all types of musicians.
- Professional kick drum pedal.- Aluminum hinge.- With steel base plate.- Double chain and sprocket.- Side coupling mechanism.- Double-sided mallet (felt-plastic).- Includes tuning key support.- Weight approx.
- Sliding tube 25.4 mm.- Base for a stand.- Support rod 12.7 mm.- Crome finish- Weight approx.
Most viewed products
-Includes: - NP-8 deaf box.- MD hexagon with rubber.- 3/8 thread pitch.- Finished with black epoxy.- Weight approx. 0.600,Kgr.
- Tabal Valenciano ropes with damper 25x20cm in walnut.- Beech plywood hull 5.5 mm 7 ply.- Wooden rings 8 mm in walnut.- 10 leather tensioners in 4mm canamo.- Tensioning bridge regulator by graphed roller.- Fixed brass bolt.- 2 double twisted silk basins.- Hanging hook- White beater patch 10" of 250 microns.- 10" transparent 75 micron patch.- Weight 3.035 kg.- Recommended for beginners of...
- Includes: - Valencía rope tabalet 30.5 Ø x 20 cm special in walnut.- Hull made of 5.5 mm 7 ply beech plywood.- 8 mm walnut wooden hoops.- 10 4mm hemp leather tensioners.- Tensioning bridge regulator by graphited roller.- Fixed brass bolt.- 2 double winding snares.- Hanging hook- drumhead 12" white whisk of 250 microns.- drumhead 12" 75 micron transparent snare drum.- Inner damper ring (not...
- Crome Band Snare drum lined 12" X 09 cm.- Beech wood hull 5mm 7ply.- Lined in black PVC. - Metal ring 30.5 Ø 6 divisions beater 1.6mm chrome. (31-6210-00) - Metal ring 30.5 Ø 6 divisions board 1.6mm chrome. (31-6220-00)- Bridge with rulina to regulate the bordonero. (30-126-00)- Chrome bridge board. (30-1340-00)- Pot decompression 10mm nickel. (99-3650-00)- Chrome embroidery 12 threads....
- Castanet nº 8 black granadillo.- Black granadillo wood.-Pair- Weight approx. 0.161 gr- Ideal for experienced people.- Regional dances and jacks- Cardboard Snare drum for shipping.- Made in Spain.
- Rims for Tom with 6 divisions.- Adjustable to Tom by screws.- With clamp for 12.7 mm rod.- Weight approx.
16 other products in the same category:
-Includes: - NP-8 deaf box.- MD hexagon with rubber.- 3/8 thread pitch.- Finished with black epoxy.- Weight approx. 0.600,Kgr.
-DRUMSETS Snare drum foot. -Double-arm feet-Adjustable basket for boxes from 10" to 14".-With gear clamp for fast and flexible adjustment. -Multi-clamp.-Minimum and maximum height: 47cm - 63c.-Non-slip rubbers. - Weight approx. - Ideal for all types of musicians.
- Support Scissor-shaped bass drum.- Painted hieero tube.
- Support flat Chinese Snare drum.- 2 plates of 100x15x03 old.- 4 screws m6X50.- 4 rubber washers.- Weight approx.- Ideal for carrying the Chinese Snare drum outside the drum.
-Includes:- Bass drum chamber support 66.0 Ø. - Three-point height adjustment.- Ears with turning handle.- 2 Wheels with brake.- 2 wheels without brakes.- 2 cast aluminum brackets. - Weight approx. 8,100 Kgr.
- Support Bombo cymbals.- Turned wood.- Fastening to the helmet by tonillo.- For plates up to 14"
-Includes:- Bass drum chamber holder 91.4 Ø. - Three-point height regukation.- Ears with turning handle.- 2 Wheels with brake.- 2 wheels without brakes.- 2 cast aluminum brackets. - Weight approx. 8,250 Kgr.
-Includes:- Bass drum chamber support 50.8 Ø. - Height-adjustable side.- Ears with turning handle.- 2 Wheels with brake.- 2 wheels without brakes.- 2 cast aluminum brackets. - Weight approx. 8.00 Kgr.
- Professional giraffe support.- 29mm, 26mm, 22mm tube.- Telescopic in three tubes.- Extendable with a 600 mm arm.- Adjustable knobs 8 mm. - Double 17x4mm tripod plates.- Non-slip rubbers on the legs. - Ideal for giraffe-like plate foot.- Chrome finish.- Weight 4,389 kg. - Support great durability as long as it is taken care of.- Ideal for musicians who need to do a lot of assembly and...
-Includes:- Bass Drum Concert Stand of 80.3 Ø.- Rotating ears for 360º position.- Three-point height adjustment.- 2 wheels with brake.- 2 Wheels without brake- Painted with epoxy stone.- Weight approx.
-Includes:- Bass drum chamber stand 55.9 Ø. - Three-point height adjustment.- Ears with turning handle.- 2 Wheels with brake.- 2 wheels without brakes.- 2 cast aluminum brackets. - Weight approx. 8,050 Kgr.
- Support flat Chinese Snare drum.- 2 plates of 100x15x03 chrome.- 4 screws m6X50.- 4 rubber washers.- Weight approx.- Ideal for carrying the Chinese Snare drum outside the drum.
-Includes:- Bass drum chamber support 71.1 Ø. - Three-point adjustment.- Ears with turning handle.- 2 Wheels with brake.- 2 wheels without brakes. - 2 cast aluminum brackets. - Weight approx. 8,125 Kgr.
- Chinese U-box support.- 2 plates of 67x15x03 old.- 2 m6X50 screws.- 2 x M6x30 screws. - 4 rubber washers.- Weight approx.- Ideal for carrying the Chinese box inside the drum.
The pedal for Bombo NPdrums is built on a base to the ground where the action of the foot sets in motion a mace with recoil to hit the patch of the bass drum, with height adjustment and sticking of the club.
