The flat supports finished in old to attach the Chinese boxes or NPdrums toothpicks® are supplied with two plates that are attached to the drum part with its four rubber washers for the drum part and thus avoid vibrations with 2 long screws and two short metric 6 screws that will be embedded in the Chinese box, We recommend that you put 2 screws and if you fit all four perfectly, ideal for all types of toothpicks or Chinese boxes. EAN13 8435288160856
- Support flat Chinese Snare drum.
- 2 plates of 100x15x03 old.
- 4 screws m6X50.
- 4 rubber washers.
- Weight approx.
- Ideal for carrying the Chinese Snare drum outside the drum.
Sheet
Specific references
Most viewed products
-Includes:- Mini crome Sayón 30.5 Ø X 12 cm.- Hull of plywood calabó 5mm 2 ply.- Lined in wine-red PVC.- Plastic beater ring 25.4 Ø x 35mm fire. (31-7811-02)- Plastic snare ring 25.4 Ø x35mm fire. (31-7821-02)- Complete drum bass bridge. (30-6830-00)- Decompression part. (99-3650-00) - 4 wound silk staffs. (28-0000-00)- 10 tension screws 80mm. (30-4020-00)- 10 Nickel-plated washers 6x11x1.5mm....
- Belt-Snare drum of 40 mm black suede.- Leatherette saw 2.5 mm thick.- Length of the strap 1.40 m.max 1.65 m.- Height adjustment by chrome buckle.- Weight 0.55 kg.- Widely used for bands, charangas folkloric acts.- Comfortable and fits the shoulder.
- Chrome-plated drum drum 50.8 Ø X 50 cm. - Lined in black PVC.- Solid wood hoops finished in smooth graphite.- Supports the helmet in a telescopic tube in a 360º position.- 10 chrome lugs per side with independent tuning.- 2 adjustment levers. - 4 swivel wheels with 2 brakes.- 9 mm plywood hull with 45º reinforcement.- drumhead Frost 388 microns.- Weight: approx. bass drum and stand: 18 kg.-...
- Swab with a quick hook.- 50mm nylon in colors.- Hook to hang adptable to any position.- Nickel sliding hevilla to regulate the clamping measure.- Length 1.50mm.- Weight approx. 0.50 gr. - Ideal for surdos of all sizes and timpani.- Very comfortable for parades and batucadas.
16 other products in the same category:
- Professional kick drum pedal.- Aluminum hinge.- With steel base plate.- Double chain and sprocket.- Side coupling mechanism.- Double-sided mallet (felt-plastic).- Includes tuning key support.- Weight approx.
-Includes:- Bass drum chamber support 50.8 Ø. - Height-adjustable side.- Ears with turning handle.- 2 Wheels with brake.- 2 wheels without brakes.- 2 cast aluminum brackets. - Weight approx. 8.00 Kgr.
-Includes: - Blank box support.- Ideal for all types of deaf boxes.- 3/8 thread pitch.- Folding to tranorate.- Finished with black epoxy.- Position regulator.- Weight approx.1,Kgr.
-DRUMSETS Snare drum foot. -Double-arm feet-Adjustable basket for boxes from 10" to 14".-With gear clamp for fast and flexible adjustment. -Multi-clamp.-Minimum and maximum height: 47cm - 63c.-Non-slip rubbers. - Weight approx. - Ideal for all types of musicians.
-Includes:- Bass drum chamber holder 91.4 Ø. - Three-point height regukation.- Ears with turning handle.- 2 Wheels with brake.- 2 wheels without brakes.- 2 cast aluminum brackets. - Weight approx. 8,250 Kgr.
- Floor support for Tom toms.- Height adjustable.- Hold of 2 toms.
- DRUMSETS saddle.- Double stirrup construction.- 28 cm diameter circular seat with extremely low height adjustment.- Threaded shaft adjustment.- Minimum seat height: Approx. 37 cm- Maximum seat height: Approx. 47 cm- Weight approx. 2.600 KG.
-Includes:- Bass Drum Concert Stand of 80.3 Ø.- Rotating ears for 360º position.- Three-point height adjustment.- 2 wheels with brake.- 2 Wheels without brake- Painted with epoxy stone.- Weight approx.
- Floor stand for Tom toms.- Height adjustable.- Clamping a tom.
- Professional giraffe support.- 29mm, 26mm, 22mm tube.- Telescopic in three tubes.- Extendable with a 600 mm arm.- Adjustable knobs 8 mm. - Double 17x4mm tripod plates.- Non-slip rubbers on the legs. - Ideal for giraffe-like plate foot.- Chrome finish.- Weight 4,389 kg. - Support great durability as long as it is taken care of.- Ideal for musicians who need to do a lot of assembly and...
- Bass Drum Concert Stand of 101.6 Ø.- Rotating ears for 360º position.- Three-point height adjustment.- 4 wheels and 2 with brakes.- Painted with epoxy stone.- Weight approx.
- Supporter Tam Tam 100 cm.- Inverted U tube.- Saucer range of 100,105,110 cm.- 2 wheels with brake.- 2 wheels without brake.- 2 cast aluminum brackets. - Aporx weight.- Easy support and manageable comfortable transport.
- Shoulder pad for alumninio bass drum.- Protector in manbras and belly.- Straps to hold bomo.
Customers who bought this product also bought:
- Special Chinese Snare drum bubinga.- Measures 17,5 cm x 0.8 cm- Holes for support.- Use for parading.- Weight approx.
-Includes.- Marching aluminium Snare drum 35.6 Ø X 09 cm. - Aluminum hull rolled profile 1.2 mm.- Anodized in gold.- Metal ring 35.6 Ø 8 beater divisions 1.6 mm.(31-6730-00) - Metal ring 35.6 Ø 8 divisions 1.6 mm.(31-6740-00)- Fast Snare drum lever for boardboard. (30-1220-00)- Fixed bridge bordonero. (30-1340-00)- Decompression piece M-10 crome. (30-6540-00)- Chrome embroidery 12 threads....
- Special Chinese beech Snare drum.- Measures 17,5 cm x 0.8 cm- Holes for support.- Use for parading.- Weight approx.
- Beech wood drumstick.- Acorn-type ball.- Length 410mm.- Width 20mm.- Weight 0.141 kg.